-
Hot
Standard type CZF,CEF- Foot supported or centerline canned motor pump
● Efficient with an European excellent hydraulic model. ● The stator can is in imported Hastelloy C276, a high magnetic permeability and a strong resistance to corrosion. ● The slide bearing is in crystal silicon carbide（SSIC）to have a high strength, a good resistance to wearing, corrosion and a service life 10 times more than graphite bearing. ● The canned motor is a 3-phase squirrel cage type induction motor,with a high efficiency, protection class IP55,explosive-proof class deⅡCT3~T5. ● The axial force is balanced automatically and hydraulically. ● In a simple and compact modular structure,it is easy for installation and maintenance. ● In comparison with those pumps with mechanical seals, the MTBF(Mean Time Between Failure)is longer,the wearing and maintenance rate lower and the total operating cost less. ● Low noise.
Send Email Details -
High-temperature type CZF/CEF-K canned motor pump
● A pump of high-temperature type, with a single stage. ● It makes external circulation at a high pressure. ● It is used to deliver those media at a high temperature , free from particles and with a low melting point. ● The high-temperature type pump has a connection section and an external circulation cooler, which cools the motor and lubricates the slide bearing with clean ,cooled fluid
Send Email Details -
Multi-stage common standard type CMC canned motor pumps
A pump of non-self priming type ,with a multi-stage. ● It makes internal high-pressure circulation, and the motor is cooled and the slide bearing lubricated by the medium being delivered. ● It is used to deliver those media boiling, free from particles. ● With a low capacity, a high head, a small volume, and land coverage, it has an extremely low NPSH.
Send Email Details -
CMC-K-High temperature multistage horizontal canned pump
● A pump of high-temperature type, with a multi-stage. ● It makes external circulation at a high pressure. ● It is used to deliver those media at a high temperature , free from particles and with a low melting point. ● The high-temperature type pump has a connection section and an external circulation cooler, which cools the motor and lubricates the slide bearing with clean ,cooled fluid
Send Email Details -
CZF/CEF-K-S Mud type canned pump(slurry solution)
Single stage, single suction, overhung structure, open or closed impeller. The motor circulating fluid is a clean, particle-free medium that can be mixed with the conveying medium continuously into the rear external metering pump or stable pressure source. The pressure in the motor cavity is higher than that in the pump cavity, so that the medium in the pump cavity will not enter the motor cavity.
Send Email Details -
Multi-stage tandem type DCMC canned motor pumps
● A pump of non-self priming type ,up to 12 stage. ● It makes internal high-pressure circulation, and the motor is cooled and the slide bearing lubricated by the medium being delivered. ● Tandem pressurized. ● With a low capacity, a high head, it has an extremely low NPSH.
Send Email Details -
Self-priming type CXF canned motor pumps
● A pump of self-priming type(After filling pump for the first time, no need to fill the pump). ● Single-stage, single-suction, cantilevered structure. ● Through the way of inner loop，using the transmission medium for isolation sleeve and sliding bearing cooling and lubrication, don’t pollute the medium. ● Conditions for inhaled liquid surface under the impeller.
Send Email Details
