CZF/CEF-K-S Mud type canned pump(slurry solution)
Brand DALIAN KEHUAN PUMP
Product origin DALIAN, LIAONING, CHINA
Delivery time THREE MONTHS
Supply capacity SUFFICIENT SUPPLY
Single stage, single suction, overhung structure, open or closed impeller.
The motor circulating fluid is a clean, particle-free medium that can be mixed with the conveying medium continuously into the rear external metering pump or stable pressure source.
The pressure in the motor cavity is higher than that in the pump cavity, so that the medium in the pump cavity will not enter the motor cavity.
High-temperature type CZF/CEF-K-S
Branch:DN25~DN400
Capacity:Max.2000m3/h
Head: max. 200m
Speed: 1450 to 3500 rpm
Operating temperature: Max.450℃
Pressure rating: 2.5~16Mpa
Power: Max.315kw
Structure:
OH1 foot supported or OH2 centerline supported.
Single stage, single suction, overhung structure, open or closed impeller.
The motor circulating fluid is a clean, particle-free medium that can be mixed with the conveying medium continuously into the rear external metering pump or stable pressure source.
The pressure in the motor cavity is higher than that in the pump cavity, so that the medium in the pump cavity will not enter the motor cavity.
Working principle
Canned motor pump is a combination unit of centrifugal pump and 3-phase AC motor, with the hydraulic section connection directly with the motor drive shaft to constitute the rotor component jointly. The stator can is embedded on the inner side of the stator to isolate both the rotor chamber and stator chamber, that makes pumps no leakage completely.
Characteristic of canned motor pump
● Efficient with an European excellent hydraulic model.
● The stator can is in imported Hastelloy C276, a high magnetic permeability and a strong resistance to corrosion.
● The slide bearing is in crystal silicon carbide(SSIC)to have a high strength, a good resistance to wearing, corrosion and a service life 10 times more than graphite bearing.
● The canned motor is a 3-phase squirrel cage type induction motor,with a high efficiency, protection class IP55,explosive-proof class deⅡCT3~T5.
● The axial force is balanced automatically and hydraulically.
● In a simple and compact modular structure,it is easy for installation and maintenance.
● In comparison with those pumps with mechanical seals, the MTBF(Mean Time Between Failure)is longer,the wearing and maintenance rate lower and the total operating cost less.
● Low noise.