Vertical Turbine Submerged Centrifugal Pump
  • Vertical Turbine Submerged Centrifugal Pump

Vertical Turbine Submerged Centrifugal Pump

Brand DALIAN KEHUAN PUMP

Product origin DALIAN,LIAONING,CHINA

Delivery time THREE MONTHS

Supply capacity SUFFICIENT SUPPLY

Kehuan pump make a comprehensive breakthrough in the status quo of magnetic pumps (such as High power, High temperature, Mud, Easy vaporization, High melting point, etc.)
Design framework: We use European advanced hydraulic model;
Design standards according to American petroleum institute standard API685.
High standard material application: Permanent magnet (Sm2Co17, Temp. -196~450℃), Sliding bearing (SSIC), Containment shell(HC-276), Rolling bearing (SKF/NSK), Coupling (Wuxi Chuang ming) /German KTR), Electric motor (Nan yang/Jiamusi).

Vertical Turbine Submerged Centrifugal Pump

Vertical Turbine Submerged Centrifugal Pump

Product attributes:

Maximum head :>150m

Maximum fiow:>400L/min

Driving type:Motor

Working Pressure:High Pressure Pump

Working impeller number:Single-Stage Pump

Working impeller inlet way:Single Suction Pump

Pump shaft positon:Horizontal Pump

Impeller structure:Closed

Transportation package:Wooden Case

Specification:API 610 standard 

Trademark:Dalian Kehuan Pump Co.,Ltd

Origin:Dalian,Liaoning,China

API610 VS1.jpg

   Vertical Turbine Submerged Centrifugal Pump is a  Vertical turbine design (also known as wet pit, diffuser) with diffuser vanes in the pump bowl. Flow follows the axis of the pump shaft. The API 610 designation for this type of pump is VS1. This pump is used if there is insufficient NPSHA for a horizontal pump. Therefore, the VS1 pumps are supported above the medium to be pumped. The vertically oriented impellers are suspended below the support and are submerged into the medium.  VS (Vertically Suspended) Pumps can be single or multistage and in theory can work to a limitless depth. VS1 pumps achieve this through the ability to have multiple stages stacked one on top of the other (see Figure 2). They can achieve a lower Net Positive Suction Head (NPSH) by designing for this specifically in the first stage and then follow it up with unique high head per stage series hydraulics in subsequent stages.

API 610 VS1 Pump
The fluid is pumped from the sump through the support column and out into a discharge bend. The sharp bend on the discharge however produces a loss in performance. The VS1 pump generally requires a double mechanical seal and Plan 53 seal support system to prevent leakage.

Operation data
Capacities  ~800 m3/h
Heads  ~800 m
Temperatures -180 ºC~+180 ºC
Pressures  ~100 bar
Construction features
Vertically suspended/single-casing/diffuser/multistage centrifugal pumps.
Application
These pumps are used where NPSH available is limited.
Suitable for pumping clean or slightly polluted,cold or hot, chemically neutral or aggressive liquids. Apply in the industries of chemical ,petrochemical,oil&gas and refinery services.
Material
Cast steel , LTCS
Chrome steel CA15/CA6NM
Austenitic Stainless steel
Duplex steel
Super Duplex steel
Hastelloy
Titanium C2, C3
Titanium alloy C5,C12
904L
Alloy 20
* It depends the customer's request.


S-5S-6C-6S-8A-7A-8D-1D-2
CasingCast steelCast steelCA15/CA6NMCast steelAUST SS316 AUSDUPLEXSUPER DUPLEX
ImpellerCast steel12%CRCA15/CA6NM316 AUSAUST SS316 AUSDUPLEXSUPER DUPLEX
ShaftAISI4140AISI4140SS420316NAUST SS316N22052507
Wear rings12%CR12%CR12%CR316 Hard facedAUST SSHard faced316 Hard facedDuplex Hard facedSUPER Duplex
Hard faced
Bearing FrameCast steelCast steelCast steelCast steelCast steelCast steelCast steelCast steel

微信图片_20201229160702.jpg

Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy

close left right