Nitric Acid Transfer Chemical Acid Resistant Pump
Brand DALIAN KEHUAN PUMP
Product origin DALIAN,LIAONING,CHINA
Delivery time THREE MONTHS
Supply capacity SUFFICIENT SUPPLY
Kehuan pump make a comprehensive breakthrough in the status quo of magnetic pumps (such as High power, High temperature, Mud, Easy vaporization, High melting point, etc.)
Design framework: We use European advanced hydraulic model;
Design standards according to American petroleum institute standard API685.
High standard material application: Permanent magnet (Sm2Co17, Temp. -196~450℃), Sliding bearing (SSIC), Containment shell(HC-276), Rolling bearing (SKF/NSK), Coupling (Wuxi Chuang ming) /German KTR), Electric motor (Nan yang/Jiamusi/Dazhong).
Nitric Acid Transfer Chemical Acid Resistant Pump
Basic Information：
Delivery term: 3 months after receiving the advance payment.
Validity of quotation:three months from the date of the present quotation.
Payment Item: 30% down payments , 70% before delivery.
Transportation package:Wooden Case
Trademark:Dalian Kehuan Pump Co.,Ltd
Origin:Dalian,Liaoning,China
Product attributes:
Maximum head :>150m
Maximum fiow:>400L/min
Driving type:Motor
Working impeller number:Single-Stage Pump
Working Pressure:Middle Pressure Pump
Working impeller inlet way:Single Suction Pump
Pump shaft positon:Horizontal Pump
Pump shell combination:Horizontal Split Pumps
Installation height:Suction Centrifugal
Impeller structure:Closed
Specification:API 610 standard
Origin:Dali
an,Liaoning,China
}Single-stage horizontal, radially split volute casing pumps with feet below and single-entry radial impeller
}Single-stage horizontal, radially split volute casing pumps with feet below and single-entry radial impeller, end suction branch, radially upwards discharge branch.
}Depending on operating conditions hydraulic balance provided by front or rear wear rings and balance holes. Casing cover with cooling or heating connections ,
shaft sealing by packings or mechanical seals of any design (single or double seal design ), connections for cooling, flushing or sealing liquid.
}Standardize pipework according to API plans
}Flange possible according to GB, DIN, or ANSI
}Size: 1-16 inches
}Flow:0~2600m3/H
}Capacity: 0-2600 m3/h
}Head: 0-240m
}Temperature: -80-300 °C
}Pressure:~2.5MPa
Material:
Carbonsteel; chromed steel; austenitic stainless steel; duplex steel; Titanium and Titanium Alloys; Hastelloy C-276 and other special materials; It depends the customer's request.
S-5 | S-6 | C-6 | S-8 | A-7 | A-8 | D-1 | D-2 | |
Casing | Cast steel | Cast steel | CA15/CA6NM | Cast steel | AUST SS | 316 AUS | DUPLEX | SUPER DUPLEX |
Impeller | Cast steel | 12%CR | CA15/CA6NM | 316 AUS | AUST SS | 316 AUS | DUPLEX | SUPER DUPLEX |
Shaft | AISI4140 | AISI4140 | SS420 | 316N | AUST SS | 316N | 2205 | 2507 |
Wear rings | 12%CR | 12%CR | 12%CR | 316 Hard faced | AUST SSHard faced | 316 Hard faced | Duplex Hard faced | SUPER Duplex |
Bearing Frame | Cast steel | Cast steel | Cast steel | Cast steel | Cast steel | Cast steel | Cast steel | Cast steel |
Suitable for pumping clean or polluted, cold or hot, chemically neutral or corrosive liquids.
Apply for refineries, petrochemical industry, coal processing, fertilizer, power auxiliary circulation, heating and air-conditioning, zone heat supply, paper and pulp, water & wastewater, general industry.
Foot-mounted,single-stage ,overhung,horizontal
For pumping clean and slightly polluted,cold or hot .chemically neutral or aggressive liquids
In refineries, petrochemical industry, coal processing and cryogenic engineering
In chemical, fibre and general processing industries,particularly in paper and general processing industries,particular in paper and pulp industries and sugar industry
In water industry,particular sea water desalination plants
In heating and air conditioning plants and condensate recovery
In auxiliary circuits of power stations
In environmental protection engineering
In ship and offshore industries.
