Different Types of Centrifugal Pumps and Their Applications

Different Types of Centrifugal Pumps and Their Applications

07-07-2022

Centrifugal pump types 

   Centrifugal pumps are currently in use across a vast array of domestic and industrial processes. From supplying the water used in residential buildings to industrial applications like food, beverage, and chemical manufacturing, different types of centrifugal pumps are required to effectively meet pumping requirements.

   As reputable centrifugal pump suppliers,DALIAN KEHUAN PUMP has extensive knowledge in this field. This article describes the various centrifugal pump types and the applications to which they are best suited.

Centrifugal Pumps and How They Work

   A typical centrifugal pump set up is comprised of one or more impellers attached to a rotary pump shaft. This arrangement provides the energy required to conduct fluid through the pump system and the associated piping.

  The impellers turning in sync with the pump shaft converts dynamic mechanical energy from the pump motor into the energy of moving fluids. While most of the energy derived from the motor will be converted to kinetic energy in the pumped fluids, a portion will be channeled as potential energy in fluid pressure calculated against gravity.

Centrifugal Pump Process

  The operation cycle begins with the pump directing fluid into its suction ports and directing it onwards to the inlet of its impellers. Rotating impellers then move the pumped liquids along their spinning vanes whilst simultaneously increasing the fluid velocity.

  The “charged” fluid then leaves the impeller vanes and is conducted to a diffuser casing or pump volute where high fluid velocity generated from the impeller vanes are converted to high fluid pressure.

  Finally, the pressurized fluid is conducted to a discharge port or channeled to the next stage of a multi-stage pump system.

Different Types of Centrifugal Pumps

  The major centrifugal pump variations include the following:

·Radial

·Axial

Radial vs. Axial Centrifugal Pump

  The major distinction between a radial and an axial centrifugal pump is in their orientation. By design, a radial centrifugal pump permits an outward motion of the liquid channeled through it. The pumped liquid is pressurized and exited through downstream piping.

By comparison, axial pumps generate fluid motion via a lifting effect of their impeller vanes.

ANSI Pumps vs. API Pumps

  Many centrifugal pump systems are radial in configuration and are manufactured to meet certain industry standards. Among the most common standards are the American National Standards Institute (ANSI) pumps and American Petroleum Institute (API) pumps.

Centrifugal pump application field  ANSI pumps are high-quality pumps with a single impeller unit that facilitate easier maintenance. ANSI pumps are interchangeable with other similar rated pumps. This type of centrifugal pump is ideal for low rates of fuel flow.

   API pumps are manufactured to meet certain industrial dimensions including the presence of a hold-down bolt placement size, and a predetermined pump coupling height. API pumps are typically radial in configuration and are useful in heavy-duty operations in the oil and gas industry.

Single-stage, Two-stage, or Multi-stage

  The classification of centrifugal pumps by stage is dependent on the number of impellers present within their setup.

Single-Stage

  This pump type houses only one impeller within its casing, making maintenance quite easy. A single-stage centrifugal pump is best suited to low-pressure operations where a large flow rate is maintained.

Two-Stage

   A two-stage centrifugal pump possesses dual impellers functioning together to pump the associated process liquids. It is a device best used in medium head applications.

Multi-Stage

   Multiple impellers (three or more) are required in this centrifugal pump system to achieve maximal efficiency. Multi-stage pumps are best for high head applications.

Common Industrial Centrifugal Pump Applications

  Centrifugal pump uses are common throughout a diverse range of domestic, commercial, and industrial markets. Examples of centrifugal pump applications include but are not limited to:

§ Water supply for residential areas

§ Fire protection systems

§ Sewage/slurry disposal

§ Food and beverage manufacturing

§ Chemical manufacturing

§ Oil and gas industrial operations

DALIAN KEHUAN PUMP Has a Massive Selection of Centrifugal Pumps

   At DALIAN KEHUAN PUMP, we provide standards and custom-built centrifugal pump solutions for a wide range of commercial, and industrial processes including aviation, agriculture, food manufacturing, and oil and gas. With a massive selection of centrifugal pumping systems to choose from, you are guaranteed the best fit for your unique application.


Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy