Low Temperature Cast Steel Centrifugal Pump
Brand DALIAN KEHUAN PUMP
Product origin Dalian,Liaoning,China
Delivery time THREE MONTHS
Supply capacity Sufficient supply
Kehuan pump make a comprehensive breakthrough in the status quo of magnetic pumps (such as High power, High temperature, Mud, Easy vaporization, High melting point, etc.)
Design framework: We use European advanced hydraulic model;
Design standards according to American petroleum institute standard API685.
High standard material application: Permanent magnet (Sm2Co17, Temp. -196~450℃), Sliding bearing (SSIC), Containment shell(HC-276), Rolling bearing (SKF/NSK), Coupling (Wuxi Chuang ming) /German KTR), Electric motor (Nan yang/Jiamusi).
Low Temperature Cast Steel Centrifugal Pump
Product attributes:
Maximum head :>150m
Maximum fiow:>400L/min
Driving type:Motor
Working impeller number:Single-Stage Pump
Working Pressure:Middle Pressure Pump
Working impeller inlet way:Single Suction Pump
Pump shaft positon:Horizontal Pump
Pump shell combination:Horizontal Split Pumps
Installation height:Suction Centrifugal
Impeller structure:Closed
Transportation package:Wooden Case
Specification:API 610 standard
Trademark:Dalian Kehuan Pump Co.,Ltd
Origin:Dalian,Liaoning,China
Size: 1-16 inches
Flow:0~2600m3/H
Capacity: 0-2600 m3/h
Head:0~300m
Temperature: -80~450 Degrees Celsius
Pressure:~5MPa
Suitable for pumping clean and slightly polluted, cold or hot, chemically or aggressive liquids
In refineries
In petrochemical plants
In cryogenic engineering
In coal processing
In chemical industry, fibre industry and general processing industry
In auxiliary circuits of power plants
In medium-sized and large heating and air-conditioning plants
In environmental protection engineering
In offshore industry and seawater desalination plants
Material:
Carbonsteel; chromed steel; austenitic stainless steel; duplex steel; Titanium and Titanium Alloys; Hastelloy C-276 and other special materials; It depends the customer's request.
S-5 | S-6 | C-6 | S-8 | A-7 | A-8 | D-1 | D-2 | |
Casing | Cast steel | Cast steel | CA15/CA6NM | Cast steel | AUST SS | 316 AUS | DUPLEX | SUPER DUPLEX |
Impeller | Cast steel | 12%CR | CA15/CA6NM | 316 AUS | AUST SS | 316 AUS | DUPLEX | SUPER DUPLEX |
Shaft | AISI4140 | AISI4140 | SS420 | 316N | AUST SS | 316N | 2205 | 2507 |
Wear rings | 12%CR | 12%CR | 12%CR | 316 Hard faced | AUST SSHard faced | 316 Hard faced | Duplex Hard faced | SUPER Duplex |
Bearing Frame | Cast steel | Cast steel | Cast steel | Cast steel | Cast steel | Cast steel | Cast steel | Cast steel |
